Kongsberg Simrad EK80, Руководство по установке, Страница: 118 / 354

116
394149/D
Setting up the Moxa CP114EL-I serial ports
The interface ports provided by the
Moxa CP114EL-I
serial adapter board are configured
using a dedicated driver application in the operating system.
Prerequisites
This procedure is made for the Microsoft
®
Windows
®
7 operating system. It is assumed
that you are familiar with this operating system. Operation in Microsoft ® Windows ®
10 is very similar.
Context
As long as you do not change the Processor Unit
to another computer, or replace the serial adapter
in your Processor Unit, you will only need to do
this once.
Note
This information is intended for certified
maintenance technicians and service engineers
from Kongsberg Maritime, or from a certified
dealer, distributor or agent. It is assumed that
you are familiar with the Windows
® operating
systems, computer technology, and interface
principles. We strongly advise our end users not
to alter the parameters described.
Procedure
1 Select
Start
→
Control Panel
→
System
.
2 On the left side, select
Device Manager
.
3 In the
Device Manager
dialog box:
a Expand the
Multi-port serial adapters
option.
b Double-click
Moxa CP114EL Series (PCI Express Bus)
to open the configuration
utility.
c Observe that the dedicated properties dialog box opens.
4 Open tab
Ports Configuration
, and select the serial port you wish to configure.
5 Select
Port Setting
to open the configuration dialog box
Simrad EK80 Installation Manual