Kongsberg Simrad EK80, Руководство по установке

Страница: 287 / 354

394149/D
285
•
Simrad DBS
Simrad DBS is a proprietary datagram format created by Kongsberg Maritime to
provide the current depth of the trawl sensor.
•
Simrad HFB
Simrad HFB is a proprietary datagram format created by Kongsberg Maritime. It
provides the vertical distance (height) from the headrope to the footrope, and from the
headrope to the bottom. The heights are measured by an ITI TrawlEye or a height
sensor. If you use two height sensors, the information from the second sensor is
provided in the Simrad HB2 datagram.
•
Simrad TDS
Simrad TDS is a proprietary datagram format created by Kongsberg Maritime to
provide the door spread. That is the distance between the two trawl doors. In a dual
trawl system, the distance between the second door set is provided in the Simrad
TS2 datagram.
•
Simrad TPR
Simrad TPR is a proprietary datagram format created by Kongsberg Maritime. It
provides the relative bearing and water depth of the trawl sensor, as well as its
distance from the vessel. The bearing resolution is 1 degree. The Simrad ITI measures
the depth differently from the range and the bearing. If the ITI only knows the range
and the bearing, the depth field is empty.
• Simrad TPT
Simrad TPT is a proprietary datagram format created by Kongsberg Maritime to
provide the true bearing and water depth of the trawl sensor, as well as its distance
from the vessel. The bearing resolution is 1 degree.
Related topics
Interface specifications, page 281
Technical specifications, page 279
Supported datagram formats for motion information
The EK80 will interface with peripheral systems and sensors using standard and/or
proprietary datagram formats. When enabled, the navigational information on the top
bar includes the vessel’s current roll, pitch and heave movements.
The EK80 supports the following
datagram formats from a motion sensor.
•
KM Binary
KM Binary is a generic datagram format defined by Kongsberg Maritime. This format
has very high resolution on timing and sensor parameters.
Technical specifications