Kongsberg Simrad EK80, Руководство по установке

Страница: 207 / 354

394149/D
205
6 Select
OK
to save the license string and close the
Type License String
dialog box.
7 Verify that the license string is placed in the
Currently active licenses
list.
If necessary, select the license string on the left side, and click the arrow button [ > ]
to move it to the
Currently active licenses
list.
8 Select
Apply
and then
Close
to save all the parameters and close the
Installation
dialog box.
Related topics
Turning on the EK80 for the first time, page 199
Setting to work, page 185
Defining the IP address on the Processor Unit network
adapter for communication with the transceiver
The Processor Unit and the transceiver(s) communicate on a high capacity Ethernet
cable. If more than one transceiver is used, an Ethernet switch is added. On the Processor
Unit, define the IP address and Subnet mask for the Ethernet port used to communicate
with the transceiver(s). The EK80 automatically assigns an IP address to each transceiver
when they are turned off and on.
Prerequisites
This procedure is made for the Microsoft
®
Windows
®
10 operating system. It is assumed
that you are familiar with this operating system.
Context
As long as you do not change the Processor Unit to another computer, or replace the
network adapter in your Processor Unit, you will only need to do this once.
Procedure
1 On the Processor Unit, close the EK80 program.
2 Open the
Network Connections
dialog box.
a In the bottom-left corner of your desktop, select the Windows ® search function.
b In the search box, type "Network Connections", and open the
Network
Connections
dialog box.
3 Right-click the network adapter you are going to use and select
Properties
on the
shortcut menu.
4 On the list of connections, select
Internet Protocol 4 (TCP/IPv4)
, and then
Properties
.
5 Select
Use the following IP address
, and type the IP address and network mask.
•
IP Address
: 157.237.15.12
Setting to work