Kongsberg Simrad EK80, Руководство по установке, Страница: 77 / 354

394149/D
75
Note
In order to allow for future maintenance, we recommend to mount the unit with its
cables and connectors available for easy access.
3 Make sure that the chosen location meets the installation requirements.
4 Provide ample space around the computer.
You must be able to reach and use the front and rear mounted connectors and on/off
switches. It is also important that you allow for easy access to all the cables, and
enough space for inspection, maintenance and parts replacement. If relevant, make
sure that the space allows you to open the computer for unobstructed access to
its internal parts.
Note
Make sure that you can access both the rear and front side of the computer after it
has been installed.
5 Install the computer.
a Turn the Processor Unit cabinet upside down, and remove the bottom plate
(A) with the shock absorbers.
b Observe the four holes in the shock absorbers and the bottom plate (B).
c Using the bottom plate as a template, mark the position of the mounting bolts
on the foundation.
d Mount the bottom plate back on the Processor Unit cabinet.
e Disassemble the two base rails from the Processor Unit by removing the two
front Allen bolts (C).
f Remove the bolts, lift the Processor Unit up and forward.
g Mount the two base rails on the foundation.
h Place the Processor Unit onto the rails at their rear end.
i Press it down.
j Secure the Processor Unit with the two front Allen bolts (C).
6 Connect the cables.
Note
When you connect the cables, make sure that they are all properly secured, and able
to withstand the vibration and movements of the vessel.
Installing the EK80 hardware units