Kondo KXR-R4LL, Инструкция по сборке

Страница: 12 / 60

12
Prior to Assembly
Basic Frame Parts
M2 M2.6
①Bend the M2.6 end. ②Fit into the joint base.
Put the top sides together facing each other.
(The nut side faces out)
M2-8 x 4
Cut the M2 end.
Joint nut screw hole
How to set Joint Nuts
Double Joint Base （When installing joint bases）
Make sure the installation
direction is correct.
Front Side（Horn Side） Back Side（Nuts Side）
■ Joint Base
Joint parts for connecting the arms and frame, etc. with the servos.
Put on the plastic joint nut and screw to secure.
Plastic joint nuts can be replaced with M2/M2.6 metal nuts.