Komatsu WA500-6H, Руководство по эксплуатации и техническому обслуживанию

Страница: 348 / 412

5.2 Noise emission levels Technical Data
5-4
WA500-6H – VEAM430100
5.2 Noise emission levels
Two signs are attached to the machine that state the noise level
produced.
z
Sound pressure level at the operator’s station, measured
according to ISO6396 (Dynamic test method, simulated
working cycle).
z Sound power level emitted by the machine, measured
according to ISO 6395 (Dynamic test method, simulated
working cycle). This is the guaranteed value as specified in
European directive 2000/14/EC
No alterations may be made to the machine which could have
an influence on the noise emission levels.
5.3 Vibration level
When used for its intended purpose, levels of vibration for the
earth-moving machine transmitted from the operator’s seat are
lower than or equal to the tested vibrations for the relative
machinery class in compliance with ISO 7096.
The actual acceleration value for the hands and arms is less
than or equal to 2.5 m/s². The actual acceleration value for the
body is less than or equal to 0.5 m/s².
These values were determined using a representative machine
and measured during the typical operating condition indicated
below according to the measurement procedures that are
defined in the standards ISO 2631/1 and ISO 5349.
Operating condition:
Wheel loader: V-shape loading