Komatsu WA500-6H, Руководство по эксплуатации и техническому обслуживанию

Страница: 125 / 412

Operation 3.2 Explanation of components
WA500-6H – VEAM430100
3-59
24. Transmission cut-off set switch
CAUTION
Apply the parking brake before adjusting the transmission cut-off
position.
Turn this switch (24) ON to adjust the brake pedal position
where the transmission is automatically shifted to Neutral.
Position (a): ON
Cut-off position can be adjusted
When the switch is released, it automatically returns to its origi-
nal position.
For details of the method of adjusting the cut-off position, see
"Adjusting transmission cut-off position (3-121)".
25. Remote positioner raise/lower set switch
Use this switch (25) to set the kick-out position for the lift arm.
Position (a):
When the lift arm is above the horizontal position, raise the lift
arm to the position to set the kick-out. Press the top (a) of this
switch to set the kick-out for the RAISE operation at that posi-
tion.
Position (b):
When the lift arm is below the horizontal position, lower the lift
arm to the position to set the kick-out. Press the bottom (b) of
this switch to set the kick-out for the LOWER operation at that
position.
If the setting has been made without problem, the buzzer emits
short sounds.
If it was not possible to make the setting, the buzzer does not
sound.
If the switch is kept pressed for more than 1 second, the buzzer
emits a long sound and the kick-out position setting is cancelled.
For details, see "Operating remote boom positioner (3-126)".
GK050063
a
b
GK050064
a
b