Komatsu WA500-6H, Руководство по эксплуатации и техническому обслуживанию

Страница: 291 / 412

4.9 Service procedure
Maintenance When required
WA500-6H – VEAM430100
4-37
Check the oil level at least 12 hours after the engine has
stopped, and use the ENGINE STOP position.
It is also possible to check when the engine is running at low
idling, but in that case, do as follows.
Method of checking level at idling
z When checking after leaving at idling (when heat is balanced
in whole transmission as after actual work.
User operating continuously.
(check during lunch time or check during change of shift)
 Run at idling for at least 15 minutes, then leave.
 Check when torque converter oil temperature gauge is in
middle of bottom scale.
z
When checking after raising temperature with stall.
When shipped from factory, etc.

When raising temperature with stall, check when torque
converter oil gauge is between bottom scale and second
scale from bottom.

Run at idling for at least 15 minutes, then leave.
GK050197
GK050198