Komatsu WA500-6H, Руководство по эксплуатации и техническому обслуживанию

Страница: 240 / 412

3.7 Troubleshooting Operation
3-174
WA500-6H – VEAM430100
3.7.2 Towing the machine
WARNING
z Serious injury or death could result if there is any mistake in
the selection of wire rope or method of towing a disabled
machine.
z Check that the wire rope is of ample strength for the weight
of the machine being towed.
z Never use a wire rope which has cut strands (A), reduced
diameter (B), or kinks (C). There is danger that the rope may
break during the towing operation.
z Always wear leather gloves when handling wire rope.
z Never tow a machine on a slope.
z During the towing operation, never stand between the tow-
ing machine and the machine being towed.
z Move the machine slowly and be sure not to apply any sud-
den load on the wire rope.
z If there is a failure in the brake line, the brakes cannot be
used, so be extremely careful when towing.
NOTE
z
Towing is for moving the machine to a place where inspec-
tion and maintenance can be carried out, and not for moving
it long distances.
The machine must not be towed for long distances.
z
For details of the permissible towing load for this machine,
see "Technical data (5-2)".
z
For details of the procedure for towing a machine when it
has broken down, please contact your KOMATSU distribu-
tor.
This machine must not be towed except in emergencies. When
towing the machine, take the following precautions.
z Before releasing the brakes, put blocks under the wheels to
prevent the machine from moving. If the wheels are not
blocked, the machine may suddenly move.
z When towing a machine, tow it at a low speed of less than 2
km/h, and for a distance of a few meters to a place where
repairs can be carried out. The machine should be towed
only in emergencies. If the machine must be moved long
distances, use a transporter.
z If it is impossible to operate the steering and brakes of the
machine being towed, do not let anyone ride on the
machine.
GK032072