Komatsu PC30MR-5, Руководство по эксплуатации и техническому обслуживанию

Страница: 147 / 380

2.
While pulling the floor lock release lever (9) to FREE posi-
tion (F) with your left hand, hold the handle (10) with your
right hand and push it down slowly to the direction of arrow
(approximately 45 °) to release the first lock.
3.
Hold the handle (10) with your right hand and lower the
floor slowly to the direction of arrow (approximately 45 °).
NOTICE
Check that there is no pinched or damaged wiring har-
ness and piping.
4.
Close the inspection window (8).
5.
Open the engine rear cover (5).
Open the engine rear cover (5) backward fully and it is se-
cured by the rod (6).
6.
Tighten the floor tilt fixing bolts (7) (M14, 2 pieces).
Tightening torque: 156.8 to 196.0 Nm {16.0 to 20.0 kgm}
REMARK
If any of the floor tilt fixing bolts is damaged, replace it with
a Komatsu genuine part of the same size.
7.
Close the engine rear cover (5).
OPERATION EXPLANATION OF COMPONENTS
3-81
WENAM00150