manualshive.com logo in svg

Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Komatsu HB215LC-3 Скачать руководство пользователя страница 314

When the machine passes over the rear wheels, it inclines
backward.  Carefully  drive  the  machine  in  reverse  to  the
specified point, and then stop it.

METHOD FOR SECURING MACHINE

NOTICE

• Stow the radio antenna. Retract the mirrors so that they are within the width of the machine.

For stowing radio antenna, see “STOW ANTENNA”. For stowing mirror, see “PROCEDURE FOR AD-
JUSTING MACHINE LEFT FRONT MIRROR (A)”.

• To prevent damage to the bucket cylinder during transportation, put a wooden block under the tip of

the bucket link to prevent the bucket cylinder from touching the floor.

• Check that the engine hood catcher is locked. Hold the handle of the engine hood and raise it slight-

ly. If it does not open, the catcher is locked.
If the engine hood catcher is not locked, there is a danger that the engine hood may open during
transportation.

After loading the machine onto a trailer, secure the machine as follows.
1.

Extend  the  bucket  and  arm  cylinders  fully,  then  lower  the
boom slowly.

TRANSPORTATION

OPERATION

3-242

Содержание HB215LC-3













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды