Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 145 / 492

1.
Select “Attachment Setting” (1) on the “Machine Setting”
menu (b) screen, then press the switch F6.
2.
On the “Attachment Setting” screen shown in the figure,
select an attachment setting to adjust and press the switch
F6.
On “Attachment Setting” screen shown in the figure, you
can perform the following operations with switches F1 to
F6.
F1: Changes the name of the selected attachment setting.
F2: Changes the oil flow rate of the selected attachment
setting.
F3: Moves to the next item (1 line below). When it is on the
last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is on the first line, it moves to the last line.
F5: Cancels the selection and returns the screen to “Machine Setting” menu screen.
F6: Allocates the selected setting to that of ATT/P or ATT/E mode.
Changing Attachment Setting name
You can change the name for the attachment setting to desired name.
You can use alphabet letters (A to Z), Arabic numerals (0 to 9), symbols (#, *, +, -, and /), and the blank (space).
1.
Select a setting to change on the “Attachment Setting”
screen, then press the switch F6.
• When working mode is set to B mode
Change the name by referring to “Changing the
“Breaker Setting” name”.
• When working mode is set to ATT/P mode or ATT/E
mode
Change the name by referring to “Changing the “At-
tachment Setting” name”.
Changing the flow rate of “Breaker/Attachment Setting”
1.
Select an attachment setting to change its oil flow rate on
the “Attachment Setting” screen, then press the switch F2.
• When working mode is set to B mode
Change the flow rate by referring to “Changing the
flow rate of “Breaker Setting””.
• When working mode is set to ATT/P mode or ATT/E
mode
Change the flow rate by referring to “Changing the
flow rate of “Attachment Setting””.
OPERATION EXPLANATION OF COMPONENTS
3-73