Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 172 / 492

CONTROL LEVERS AND PEDALS
(1) Lock lever
(2) Travel levers (with pedal and auto-deceleration
system)
(3) L.H. work equipment control lever (with auto-decel-
eration system)
(4) R.H. work equipment control lever (with auto-de-
celeration system)
LOCK LEVER
k k
WARNING
• Before you stand up from the operator's seat, securely set the lock lever to LOCK position. If the
lock lever is not in LOCK position and the control levers or control pedals are touched by mistake, it
may lead to serious personal injury or death.
• Check that the lock lever is securely in LOCK position.
• When pulling up or pushing down the lock lever, be careful not to touch the work equipment control
lever. Check that your clothes do not get caught by the work equipment control lever.
• Before setting the lock lever to FREE position, make sure that all control levers and pedals are set
to NEUTRAL position. If any of them is out of NEUTRAL position, the work equipment or machine
may move suddenly and cause a serious personal injury or death.
The lock lever is a device to lock the work equipment, swing,
travel, and attachment (if equipped) operations.
Be sure to operate the lock lever by the operating portion (g).
Do not operate by holding the red bar on the console.
(L) LOCK position
Red bar on the console is lowered, and the machine does not
move even when the control levers or attachment control ped-
als (if equipped) are operated,
(F) FREE position
Red bar on the console is raised, and it blocks the passage.
The machine moves when the control levers or attachment control pedals (if equipped) are operated,
REMARK
Machine does not move when the lock lever is in LOCK position (L) while the control levers or control pedals
move since the lock lever is of hydraulic lock type.
EXPLANATION OF COMPONENTS OPERATION
3-100