Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 214 / 492

1) Push the float gauge (G) straight down with the fuel
filler cap (F). Be careful not to get the float gauge (G)
caught in the tab of the fuel filler cap, and tighten the
fuel filler cap (F).
2) Tighten the strainer valve cap (H) until it comes to
CLOSE position (K).
It prevents the fuel which remains in the hose from
leaking.
3) Return the fuel refilling hose (1) into the front right
door of the machine.
METHOD FOR DRAINING WATER AND SEDIMENT FROM FUEL TANK
1.
Open the right side door of the machine.
2.
Prepare a container to catch fuel under the drain hose (1).
3.
Turn drain valve (2) to OPEN position (O) to drain all the
sediment and water accumulated at the bottom together
with fuel.
4.
When only the clean fuel flows out, turn the drain valve (2)
to CLOSE position (S).
5.
Close the door.
METHOD FOR CHECKING WATER SEPARATOR, DRAINING WATER AND SEDI-
MENT
1.
Open the pump room door on the right side of the ma-
chine.
2.
Check for water and sediment.
It is possible to judge the water level and amount of sedi-
ment by looking through the transparent cup (2).
NOTICE
If the water in transparent cup (2) freezes, wait until
the frozen water has melted completely, then follow
the procedure to drain the water.
3.
Place a container to catch the water under the drain hose
(3).
4.
Loosen the drain valve (4) and drain the water.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-142