Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 142 / 492

Changing “Breaker Oil Flow Rate Setting”
1.
On the “Breaker Setting” screen, select a setting to change
its oil flow rate, then press the switch F2.
2.
The “Breaker Oil Flow Rate Setting” screen is displayed.
On the “Breaker Oil Flow Rate Setting” screen, you can
perform the following operations with switches F3 to F6.
F3: Decreases the flow rate by 1 level.
F4: Increases the flow rate by 1 level.
F5: Returns the screen to the “Breaker Setting” screen
without changing the oil flow rate.
F6: Enters the oil flow rate setting and returns the screen
to the “Breaker Setting” screen.
(X): Current oil flow rate setting
(Y): Min. adjusted oil flow rate
(Z): Max. adjusted oil flow rate
ATTACHMENT SETTING
For the machines ready for installation of attachment, you can adjust the oil flow rate in ATT/P mode and ATT/E
mode according to the installed attachment with “Attachment Setting” menu.
For the machines that have no attachment, “Attachment Setting” menu is not displayed.
1.
Select “Attachment Setting” (3) on the “Machine Setting”
menu (b) screen, then press the switch F6.
2.
On the “Attachment Setting” screen shown in the figure,
select an attachment setting to adjust and press the switch
F6.
On “Attachment Setting” screen shown in the figure, you
can perform the following operations with switches F1 to
F6.
F1: Changes the name of the selected attachment setting.
F2: Changes the oil flow rate of the selected attachment
setting.
F3: Moves to the next item (1 line below). When it is on the
last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is on the first line, it moves to the last line.
EXPLANATION OF COMPONENTS OPERATION
3-70