Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 193 / 492

When the degree of urgency is low
• If regeneration performance caution lamp (2) lights up in
yellow (action level (3): “L01”), screen (A) is displayed first.
• The action level goes out 2 seconds later, and the screen
changes back to standard screen (B).
• If the lock lever is set to LOCK position or all the work
equipment control levers are set in NEUTRAL, the screen
changes to “Aftertreatment Devices Regeneration” screen
(C) after 3 seconds only the first time. If the manual sta-
tionary regeneration is not performed, the screen returns
to standard screen (B) after 30 seconds. Then, when the
screen returns to the standard screen, “Aftertreatment De-
vices Regeneration” screen (C) is displayed for 30 sec-
onds every 2 hours.
• If the regeneration performance caution lamp (2) lights up
in yellow, stop the machine in a safe place after finishing
the work and perform the manual stationary regeneration.
When the degree of urgency is high
• regeneration performance caution lamp (2) lights up in red,
and “L03” is displayed in red on the action level display (3).
• If the lock lever is set to LOCK position or all the work
equipment control levers are set in NEUTRAL, the screen
changes to “Aftertreatment Devices Regeneration” screen
(C) after 3 seconds. Then, “Aftertreatment Devices Regen-
eration” screen (C) and standard screen (D) are automati-
cally displayed alternately in accordance with the lever op-
eration, until the manual stationary regeneration is per-
formed.
• If the regeneration performance caution lamp (2) lights up
in red, immediately stop the machine in a safe place and
perform the manual stationary regeneration.
OPERATION EXPLANATION OF COMPONENTS
3-121