Kohler rada Intelligent Care MX1 60, Руководство по установке

Страница: 14 / 36

14
1367864-W2-C
a e d c b
Tighten the backplate nut. DO NOT overtighten.
Pass the power cable through the backplate.
Note: Make sure that the check valves / filter housings are installed in the correct
orientation. Arrow indicates the direction of water flow.
The check valves / filter housings are identified by a coloured dot that indicates hot and
cold connections. This assembly to be sited in a location that is accessible for servicing.
Maximum pipe length between check valve / filter housing and tap is 2 meters.
Connect to the water supplies using the supplied check valves / filter housing.
Hot Inlet - Red
Cold Inlet - Blue
DO NOT use jointing paste when making plumbing connections.
Install the Check valves