background image

Origins

®

-1.5

1.5 gpm (5.7 L/min) flow restrictor

-2.0

2.0 gpm (7.6 L/min) flow restrictor

-SS

Slip spout on any tub/shower unit

-X

Integral service stops

-CHKS

Integral check stops

-IPS

1/2” female IPS connections

-REV

Reverse coring for back to back 

installations

-LP

Loop handle

-B

Chrome brass escutcheon

-D

Chrome brass dome cover

-VP

Vandal proof escutcheon screws

-QD

Quick disconnect on hand shower units

-R

White vinyl hose in place of metal hose

-VB

Elevated vacuum breaker

-OP

13” oval plate

-72

6’ hose in place of 5’ standard

-B30

30” adjusting bar in place of standard 36” 

bar

-B48

48” adjusting bar in place of standard 36”

bar

-L/GB

Less grab bar

-T24

24” grab bar in place of standard 36” bar

-TRM

Trim only, valve not included

-STN

Satin Nickel finish

Model Numbers

Operation & Maintenance Manual

S-9603-PLR, S-9604-PLR

Specification

Warranty

Limited Lifetime

 - to the original end purchaser in 

consumer/residential installations.

5 Years

 - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete 
warranty information.

Compliance

Certified by
CSA Group

Modifications

Note: 

Append appropriate -suffix to model number.

-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)

2.0 gpm (7.6 L/min)

S-9603-PLR

Origins Hand Shower System

S-9604-PLR

Origins Tub/Hand Shower System

S-9603-PLR

Hand shower system powered by the Temptrol

®

  

Pressure Balancing valve. Features adjustable stop screw 
to limit handle turn, integrated volume control, 36” slide 
bar, in-line vacuum breaker, 60” flexible metal hose, ADA 
hand shower and standard 2.5 gpm (9.5 L/min) flow 
restrictor. Components made from metal and nonmetallic 
materials plated in standard polished chrome finish.

S-9604-PLR

Tub/hand shower system powered by the Temptrol

®

 

Pressure Balancing valve. Features adjustable stop screw 
to limit handle turn, integrated diverter,  36” slide bar, 
non-diverter tub spout, in-line vacuum breaker, 60” flexible 
metal hose, ADA hand shower and standard 2.5 gpm 
(9.5 L/min) flow restrictor. Components made from metal 
and nonmetallic materials plated in standard polished 
chrome finish.

For California Residents

WARNING:

 This product contains chemicals known to

the State of California to cause cancer, birth defects, or
other reproductive harm.

CG

Summary of Contents for 9603-PLR



















Reviews: