Kodiak LGSG13HC, Руководство оператора

Страница: 22 / 27

2 Brake adjustments
The LGSG13HC Stump Grinder is designed to permit both fine and high travel brake adjustment.
During adjustment, inspect all parts and replace any that are worn or damaged.
i. Fine travel adjustment
a. Place brake lever handle in released position.
b. Turn brake lever adjustment knob one turn in a
clockwise direction.
c. Check operation. If wheel does not lock
completely, repeat the above steps.
Fig. 10: Brake lever adjustment.
ii. High travel adjustment
a. Place brake lever handle in released position.
b. Turn brake lever adjustment knob as far as it
will go in a counter-clockwise direction
(see Figure 10). Return brake lever adjustment
knob six turns in a clockwise direction.
c. Loosen set screw in cable clamp
(see Figure 11).
d.Pull end of inner brake cable through floating pins,
spring, and cable clamp until there is no slack in the
cable.
e. Tighten set screw in cable clamp
(see Figure 11).
f. Check operation. If wheel does not lock
completely, readjust.
Fig.11 Brake assembly
Maintenance Procedures cont'd ..
20