Kodiak LGSG13HC, Руководство оператора

Страница: 21 / 27

Maintenance Procedures cont'd ..
The following are general guidelines for servicing common wear components on the LGSG13HC Stump Grinder. ALL
MAINTENANCE AND SERVICE WORK MUST BE PERFORMED BY A TRAINED AND EXPERIENCED TECHNICIAN.
Ensure that the work area is clean and free of debris prior to starting any maintenance or service work. Small particles may
become trapped in key components that may lead to serious damage to the machine and cause severe bodily harm to the
operator or technician.
Before performing any service and maintenance procedures, consult these general safety procedures for a safe
working environment.
1. Make sure that both the engine and stump grinder are cool prior to any service or maintenance work.
2. Verify that work area is clean and free of any debris, tripping or fire hazards, and other potential sources
of danger.
3. Always wear proper safety clothing and equipment for the job. These can and should include eye and
ear protection, gloves, dust mask and any other items that are appropriate for the job and jobsite
requirements
4. Ensure that the technician has tied back or remove any loose hair, clothing and any other potential hazards
and obstructions
C.General Service Procedures
5. Block the wheels.
6. Disconnect spark plug.
1 Adjusting the operator presence system
The Operator Presence System see Figure 8
pictured consists of:
i . Operator Presence Loop
Ii. Linkage
1 Lock nut
2 Rod
3 Jam nut
4 Coupler Nut
Iii. Operator Presence Switch
Iv. Stop Switch
V . Return Spring
Vi. Wiring Harness
Fig. 8 Operator presence system
By adjusting the linkage, the operator presence system can be
tuned for increased responsiveness.
i Loosen the jam nut.
ii Adjust the coupler nut to obtain proper interaction
with the operator presence switch.
iii The switch should click with a slight movement of
the operator presence loop.
iv Tighten the jam nut.
v Verify that stop switch is working before putting
machine into service.
Fig. 9 Operator presence system wiring diagram
19