Kodiak LGSG13HC, Руководство оператора

Страница: 14 / 27

Contents List
Prior to setting up the LGSG13HC Professional
Stump Grinder, check that the following items
are enclosed:
item quantity
check if enclosed
LGSG13HC Professional Stump Grinder Unit
1
____Yes ____No
Stump Grinder Operator's Manual
1
____Yes ____No
Original Engine Manufacturer's Manual
1
____Yes ____No
If any of these items are missing, please contact your local dealers
DO NOT ATTEMPT ASSEMBLY OR OPERATION WITHOUT ANY OF THESE LISTED PARTS!
Pre-Operation Procedures
Before using the LGSG13HC Professional Stump Grinder , please perform the following procedures for the
personal and property safety of the operator and jobsite and for optimal performance.
1. Before operating the Stump Grinder ensure that it is structurally and mechanically safe by checking the following:
a. Perform a detailed visual inspection on the machine with particular attention to the following:
i. Are there any loose, worn or damaged parts? If so, DO NOT ATTEMPT TO OPERATE THE
MACHINE. Make note of required parts, and contact your local dealer for replacement parts
and further assistance to service the unit PRIOR to any further use.
Ii. Is the machine, particularly the cutting wheel and teeth, clean and free of debris? Small rocks
and other foreign objects can jam machine and cause the unit to malfunction, leading to serious
injury to the operator and property damage on the jobsite.
iii. Are there any cracks or damage on the engine? Consult with the engine manufacturer's
manual for guidelines and instructions on service. DO NOT ATTEMPT TO OPERATE THE
MACHINE until engine is refurbished to engine factory standards.
b. Inspect the handle for the following:
i. Is the handle properly and securely attached to the machine?
i i . I s t h e h a n d l e s e t i n a c o m f o r t a b l e p o s i t i o n f o r t h e o p e r a t o r ? O n l y u s e m a c h i n e s t h a t t h e
operator can control easily and comfortably. Consult your local health and safety organization
for any pointers for jobsite and machine operation safety.
12