Kodiak LGSG13HC, Руководство оператора

Страница: 15 / 27

Pre-Operation Procedures cont'd
2. Before operating the Stump Grinder , perform the following environmental checks:
a. Will the machine be operation at ground level or will it be removing a stump below ground level?
Refer to the section
Stump Grinding
Below Ground Level under the Operation Procedures
section of this manual for further details.
b. Has the work area been cleared of debris such as string, wire, rocks, metal and other materials?
Such items could cause malfunction or damage to the
Stump Grinder
that could also be potentially
hazardous to the machine and operator.
c. Are all obstructions such as sprinkler lines, electrical boxes, fences etc. clearly marked?
If any of the above checks fail, please take necessary steps
to maintain or repair the unit before operating it in any
environment
Operation Procedures
A.Positioning the
LGSG13HC
1. Ensure that the stump grinder is completely turned off prior to adjusting or relocating the unit.
2. Position the cutter wheel above the top edge of the stump that is closest to you (see Point A, Figure 1 )
3. While standing behind the operator presence loop, lock brake wheel by pulling brake lever handle toward
you (see Point B, Figure 1)
4. After positioning Cutter Wheel, adjust handle height for maximum comfort, stability, and safety.
LGSG13HC
13