3-2
A-61662 April 2010
Status
The status area of the control panel consists of:
Power Mode
,
Back
Door
,
Maintenance
and
Manual
Feed
.
Power Mode
— this green LED indicates the power status or transition
between power modes.
When the scanner is in sleep mode, the Power Mode LED is the only
indicator that is active; all others are off.
Depending on the current Power Mode, the buttons on the control panel
perform different actions. The following table identifies the function of
the buttons during various Power Modes and transitions.
Back Door
— this green LED indicates if the straight pass-through
door (located at the back of the scanner) is open or closed.
•
LED not lit
: when the straight pass-through door is closed, the rotary
path to exit tray is in use.
•
LED On
: when the straight pass-through door is open, documents
being scanned will be exited through the straight pass-through door.
Power State/Transition Power Mode LED
Off
Off
Sleep>Powered up
Blinking, fast
Ready>Active
Steady green
Ready>Sleep
Blinking, fast
Sleep
Blinking, slow
Power State/Transition Power Mode LED
Off
Control panel and scanner are not on.
Sleep>Ready
Buttons are not active during this transition.
Ready>Active
All buttons perform their normal functions. Press and
hold the Stop button for 5 seconds to start the
transition process to put the scanner into sleep
mode.
Ready>Sleep
The scanner is almost ready to go into sleep mode. A
momentary press of any button resets the sleep
count-down timer.
Sleep
A momentary press of any button starts the Sleep >
Awake transition to awaken the scanner.
Содержание Ngenuity 9090DB
Страница 1: ......
Страница 39: ...4 12 A 61662 April 2010 About screen The About screen displays the scanner version and copyright information...
Страница 78: ......