Up to 8 scene actuators can be enabled through the corresponding checkboxes. The configura-
tion parameters for each scene actuators are described in the next section.
The parameter
Send read requests at startup
determines whether read requests will be sent at
application startup (and after bus voltage recovery) for the actuators’ communication objects.
See
on page 42.
3.7.2
Scene actuator
N
Parameter name
Values
Object type
Switching
1-byte unsigned int
1-byte signed int
Percentage
2-byte unsigned int
2-byte signed int
2-byte float
3-byte RGB color
Scene #1 number
Disabled
/ 1 ... 64
Scene #1 allow saving
(Only if scene not disabled)
No
/ Yes
Scene #1 initial value
(Only if scene not disabled)
[See note 1]
Scene #2
Same parameters as for scene #1
...
Scene #8
Same parameters as for scene #1
The
Object type
parameter determines the data type of the communication object for the
scene actuator. The following table shows supported data types and the corresponding value
ranges.
3.7
Scenes
95
