3.5.6
Cooling
This section is only shown if the thermostat is setup for cooling, or for both heating and cooling.
The available configuration parameters and communication objects are equivalent to the
parameters and objects described in the
Heating
configuration section, except that they apply
to Cooling operation instead.
3.6
Inputs
3.6.1
General
Parameter name
Values
Input 1 type
Disabled
Binary - Push button
Binary - Switch
Temperature probe
Input 2 type
Same options as for Input 1
Input 3 type
Same options as for Input 1
Input 4 type
Same options as for Input 1
Each of the four available multifunction inputs can be configured as a binary input (in either
push button or switch/sensor mode) or as a temperature probe input via the corresponding
Input N type
parameter. Depending on the selection, additional parameters will be enabled.
These are described in the following sections.
3.6
Inputs
90
