The following parameters can be set by the user for each time program:
• Start and end actions
• Start and end action times
• Week days (SMTWTFS) when the program is valid
• Optionally, a date range (from-to) when the program is valid
The week days parameter can be used to specify which days of the week the program should
apply to. The start and end dates make it possible to limit the weekly schedule to a specific
period of the year. For example, users could define a program that would only run on weekends
during the months of June, July, and August.
2.2.2
Timer groups
Each component enabled as a timer can be optionally added to one of four available “timer
groups”.
Timer groups can be locked (temporarily disabled) by sending a KNX telegram to a specific
communication object. While a timer group is locked, any scheduled actions for components
associated to that timer group will not run. This makes it possible to disable a group of timers
temporarily, for example during short vacations.
2.2.3
Editing of timer programs
Components for which the timer function has been enabled will show up in the “Time schedules”
page, which can be reached from the Menu page.
1
In some cases, actions are fixed and cannot be modified; for example, in a push button component that has
been configured to run a scene, the action is fixed (run the associated scene)
2.2
Time schedules
22
