Vacuum pump system SCC 950
Use
Translation of original Operating Instructions, English, KNF 304771-304773 07/18
5
2. Use
2.1. Intended use
The SCC 950 vacuum pump system is designed for use in chemi-
cal, pharmaceutical, and biological laboratories. It is designed
exclusively to transfer gases and vapors.
Make sure that the installation location is dry and that the system is
protected against water in the form of rain, spray, splashes and
drips.
The vacuum pump system is solely for use in indoor areas.
Owner's responsibility
Only install and operate the vacuum pump system under the
operating parameters and conditions described in Chapter 4,
Technical data.
Protect the vacuum pump system against humidity.
Before using a medium, check the compatibility of the materials of
the pump head, diaphragms, valves, seals and hoses with the
medium.
Before transferring a medium, check whether the medium can be
transferred safely.
Only transfer gases that remain stable under the pressures and
temperatures occurring in the vacuum pump system.
The high-performance condenser may be used only at the pump
outlet; there is a risk of implosion if it is used at the pump inlet.
Make sure the tubes for gas and cooling medium are correctly
assigned on the high-performance condenser. Inlets and outlets of
the gas connections must not be confused.
Laboratory equipment or additional components connected to the
vacuum pump system have to be suitable for use with the pneu-
matic capabilities of the vacuum pump system (see Chapter 4,
page 9).
Operating parameters and
conditions
Requirements for media
to be transferred
High-performance condenser
Accessories
