Operating the vacuum pump system
Vacuum pump system SCC 950
36
Translation of original Operating Instructions, English, KNF 304771-304773 07/18
8.2. Operation without hand terminal
The following actions can be carried out directly on the vacuum
pump system when hand terminal 1 is removed (Fig. 17):
Stop process 1 or 2 (
1
or
2
)
Open and close ventilation valve 1 or 2 (
3
or
4
)
Page hand terminal 1 or 2; the hand terminal responds
with a signal sound (
5
or
6
).
Open and close the coolant valve (accessory) of the high-
performance condenser (
7
or
8
)
For switching behavior of the coolant valve, see Tab. 5, p. 31.
Open/close the gas ballast valve via the gas ballast switch
(
9
) (also possible when the hand terminal is on the
charger):
- Press once
Open gas ballast valve, blue LED on
- Press again
Close gas ballast valve, blue LED off
1
Stop process 1 button
2
Stop process 2 button
3
Button to open/close venti-
lation valve 1
4
Button to open/close venti-
lation valve 2
5
Page hand terminal 1
6
Page hand terminal 2
7+8
Button to open/close
coolant valve (accessory)
of the high-performance
condenser
9
Gas ballast switch
Fig. 17: Buttons on SCC 950 vacuum pump system
8.3. Software
Please see the delivered CD for information on operating the
vacuum pump system via software.
