Technical data
Vacuum pump system SCC 950
10
Translation of original Operating Instructions, English, KNF 304771-304773 07/18
Other parameters
Vacuum connection and
gas outlet
For hose ID 10 mm
Ventilation connection
For hose ID 4 mm
Weight [kg]:
(including hand
terminals)
Approx.18.2
Dimensions W x H x D [mm]:
- with charging station at-
tached
- without charging station
attached
353 x 487 x 376
246 x 487 x 376
Maximum permissible ambient
relative humidity
(not condensing)
80% for temperatures up to
31°C, decreasing linearly to 50%
at 40°C
Maximum altitude of installa-
tion [m above sea level]
2000
Coolant supply parameters (high-performance condenser)
Permissible pressure [bar g]
3
Permissible temperature
- 15 °C to + 20 °C
Coolant connections on high-
performance condenser
For hose ID 8 mm
Coolant-coated surface [cm
2
]
Min. 470
Electrical data of vacuum pump system
Nominal voltage** [V]
100-240 +/- 10%
Frequency [Hz]
50-60
Maximum operating current [A] 1.7
Max. power consumption [W]
150
Protection class
IP20
Vacuum pump system fusing
[A]
2 x T2.5
Drive motor fusing
Electronic overcurrent protection
Tab. 2 (2nd part)
** Automatic mains power adjustment
The pump of the vacuum pump system is supplied by a univer-
sal power supply with integrated overload protection. It is
protected against overheating by a temperature sensor on the
motor board and equipped with overcurrent protection.
If one of these safety functions is triggered, the pump will be
shut down and must be manually reset, as follows:
Separate vacuum pump system from the mains.
Remove the cause(s) of the fault before restarting.
