Setup and connection
Vacuum pump system SCC 950
20
Translation of original Operating Instructions, English, KNF 304771-304773 07/18
1
Mounting options for foot
2
Mounting options for wire
support
3
Wire support
4
Foot
5
Snap-in positions for wire
support
6
LED
7
Power supply connection
8
Hand terminal holder for
transportation
9
Screw to fix foot to bottom
of housing
Fig. 6: Charging station for hand terminal
The green LED (Fig. 6/
6
) indicates that the hand terminal is charg-
ing (LED lit) when it is placed on the charging station and the
station is connected to the power supply via the power supply unit.
Connect only the original KNF power supply unit
1.) Bench version 1 (Fig. 6, top)
The angle of the charging station can be adjusted by the positions
of the foot and the wire support (mounting options, see Fig. 6).
2.) Bench version 2 (Fig. 6, center)
See Version 1).
