44
Operation
BlueShadow Detector 50D Instructions V7659
5.6.6 Creating and running a program with preselec-
table start time (Wake-Up Program)
The detector can start a program at a preset time (wake-up program) .
This program is preset at number 20 . The detector starts the selected
program at the specified time and date . The display switches from stand-
by (“Waiting for WakeUp”) to “R” (Run) mode .
Process
Figure
1.
Select the Device Programs menu .
2.
Enter program number 20 .
3.
Enter wake-up time, -date and the program
number you wish to start by navigating via the
horizontal arrow keys
and editing via the
numeric keypad after pressing the confirmation
key
or using the vertical arrow key .
4.
To run the wake-up program, follow the pro-
cedure as if running any other program and
confirm the start of the wake-up program 20 .
5.
Upon choosing program number 20 the detec-
tor will go into standby mode (status LED swit-
ches blue) until the set wake-up time and date .
6.
Before running the program, the detector will
perform a self-calibration .
7.
By pressing the standby button for 2 seconds
the device will immediately start to recalibrate,
interrupting the standby and deactivating the
wake-up program .
