KM SVS2000, Руководство по установке и эксплуатации, Страница: 72 / 89

68
97-1129-01 Rev. D
www.kistlermorse.com
The Code operates with a 3-minute timer. After 3 minutes has elapsed since the last time a key was pressed in
run mode, the keyboard Lock activates. Once a Code is in place and activated, the SvS2000 will not respond
to the pressing of any keys on the keypad while in run mode until the Code is entered. note: record the Code
and store it in a safe place. If misplaced, call KM for instructions on how to bypass the Code.
SeTup/changeKeyBoard locK code
Follow this procedure:
1. If the SVS2000 is in Run Mode, press the ‘9’ Key, ‘2’ Key, and Enter Key to access the menu tree. The
display shows:
92 keyBOArD LOCk
2. Press the enter key to access this menu. The display shows:
nEW CODE?
3. Use the numeric Keys to enter a one-, two-, three-, or four-digit number. Press the Enter Key to save the
Code in memory. The display acknowledges the entry and returns to:
92 keyBOArD LOCk
4. Press an Arrow Key to scroll to another menu or press the Gross or net Key to return to Run Mode.
note: The keyboard Lock Code is ‘activated’ in run mode, 3 minutes after the last key press. After 3 minutes,
the SVS2000 will not respond to the pressing of any keys until the Code is entered.
unlocKIng KeyBoard WITh KeyBoard locK code
Follow this procedure:
1. While the SvS2000 is in lockout in the run mode, press any key. The display shows:
KEy CODE?
2. enter the keyboard Lock Code. When the Code has been completely entered, press the enter key. The
display briefly shows:
keyS unLOCkeD
3. The display then returns to the Run Mode display screen.
93 KeyBoard TeST
This function displays the last key that was pressed, to test for proper keyboard functioning. Follow this
procedure:
1. If the SVS2000 is in Run Mode, press the ‘9’ Key, ‘3’ Key, and Enter Key to access the menu tree. The
display shows:
93 keyBOArD TeST
2. Press the enter key to access this menu. The display shows:
key:enTer