© 2018 KIRAMEK, INC.
10
Valet mode disables all security system functions, ensuring the horn/siren
will never trigger. Valet Mode is useful when you must hand over your
keys to a valet or maintenance technician, eliminating worry they would
trigger the horn/siren by accident.
Activation:
With the Ignition switched OFF and the 2460
Disarmed, press and hold the Program Switch for more
than 6s, until the Status LED turns OFF. (When the LED
turns OFF, release the Program Switch.)
Deactivation:
Press and hold the Program Switch again
for 6s, until the LED turns OFF. Security features are now restored.
(You may
or may not hear 2 quick chirps the first time you Arm, to inform you that you have
just exited Valet Mode.)
main features
When you activate Valet Mode, the Status LED will not blink and you
will not receive any indication of being in Valet Mode. The security sys-
tem will be completely turned off. This also means that someone could
break into your truck. Our company accepts no liability whatsoever if
your truck is stolen or vandalized or its contents stolen due to your hav-
ing entered Valet Mode. You use this feature at your own security risk.
CAUTION!
Valet Mode
PROGRAMMABLE
STARTER KILL
If the YEL/BLK output wire is properly connected to the included Starter
Kill Relay (see Install Guide pg.7), the engine won’t start until the 2460 is
Disarmed. The relay is “normally open,” which means the Starter wire is
broken until the 2460 is Disarmed and the Ignition is switched ON.
RESUME
RESUME is State Memory that remembers if the system was Armed or
Disarmed when the main power is cut. When power is restored, the 2460
will power-up Disarmed if it was Disarmed when the power was cut. If
originally Armed, it will power-up Armed and with the horn/siren blaring.
Push 6s
