Kiramek VISION 2460 Series Скачать руководство пользователя страница 4

Страница: 4 / 44

Limited Lifetime Warranty

The VISION 2460

Control Module

is backed by a limited lifetime war-

ranty against defective components and/or improper product assem-

bly to the original purchaser for as long the vehicle is owned by that

same purchaser, contingent upon installation by an Authorized VISION

Dealer. All product warranties become void if the VISION 2460 system

was not sold and installed by an Authorized VISION Dealer or the sys-

tem is moved to another vehicle.

All other parts and/or accessories

that connect to VISION 2460 systems, including but not limited to the

Starter Kill Relay, LED Program Switch, Shock Sensor, and Siren are

warranted for one (1) year from the original date of purchase.

During the warranty period, Kiramek Inc. will repair or replace, at its

sole discretion, any system component that is found defective in mate-

rial or assembly during the warranty period, provided that the product

is returned to Kiramek Inc. by an Authorized VISION Dealer and is ac-

companied by a clear and legible copy of the original purchaser’s receipt.

Any damage to your VISION 2460 system that results from normal

wear-and-tear, accidents, improper use, neglect, faulty wiring, incorrect

installation, modification, removal or defacement of the product serial

number, alteration or repair outside Kiramek Inc or its Authorized VI-

SION Dealers immediately voids this warranty.

This warranty is limited to defective parts only and does not provide

any compensation whatsoever for damages associated with the VISION

2460 system or its accessories. This warranty does not cover installa-

tion labor, product removal and/or reinstallation fees. This warranty

is valid for the original purchaser only and may not be transferred to

another party. Kiramek Inc makes no warranty against theft or vandal-

ism of the vehicle in which the VISION 2460 system was installed. This

warranty shall not be interpreted as an insurance policy against loss,

nor shall Kiramek Inc be liable any in way for such loss, financial or

otherwise.

WARNING!

DO NOT ATTEMPT TO INSTALL THIS VISION 2460 PRODUCT YOUR-

SELF BECAUSE SUCH WILL IMMEDIATELY VOID THE WARRANTY. THIS SECU-

RITY SYSTEM MUST BE PROFESSIONALLY INSTALLED BY YOUR AUTHORIZED

VISION DEALER TO VALIDATE YOUR WARRANTY.

KIRAMEK may opt to validate the above Warranty, in writing, for shipments outside Ja-

pan, in cases where there is no local VISION Dealer available to perform the install.

Содержание VISION 2460 Series













































Результаты поиска

Содержание VISION 2460 Series

Отзывы:

Похожие инструкции для VISION 2460 Series

Бренды по названию

Популярные бренды

Kiramek VISION 2460 Series, Руководство пользователя

Результаты поиска

Содержание VISION 2460 Series

Отзывы:

Похожие инструкции для VISION 2460 Series

Бренды по названию

Популярные бренды