Kipp & Zonen BREWER MK IV, Инструкция по эксплуатации

Страница: 33 / 135

MKIV OPERATOR'S MANUAL 30
10. SELECTING SITE : At the cm-> prompt type LL, and press Enter.
• a list of Site Names will appear.
•
type the number of the desired Site and press ‘Enter’ twice.
• the Tracker position will update according to the information entered in step 9, and the
new site name will appear on the Main Menu screen.
11. CONFIRMATION: If the Tripod Stand leg that is adjacent to the “ N “ marking on the lower
Tracker flange is pointing to Geographic North, then the Observation Window of the Brewer
will be pointing toward the Sun - assuming Date, Time, and site Co-ordinates are correct.
It is not of major concern if the Brewer is not pointing accurately at this time, as some other
parameters may still need adjustment.
Note: the newly entered GMT Date and Time are shown on the Computer display.
3.8 MAIN MENU COMPUTER DISPLAY
Figure 3.5: Typical Brewer Main Menu Screen
3.9 INITIAL TESTS
A few functional tests should be done prior to the Brewer being moved to the final location.
It is assumed that all setup to this point has been successful.
A brief description of each Command is given in the Section 4 of this Manual, and should be
read before proceeding.
NOTE that if only one command is issued, it may have to be followed by an “ Enter ” from the
keyboard.