V2.0
19
2.2
Driver wiring instructions
Safety ground
wire
Fixed motor cable
shielding clamp
Figure 2-2 External Wiring Drawing of Driver
warning
⚫
Ensure that all enclosures and cabinet doors are closed before powering the drive.
⚫
When installing and maintaining the drive, all power must be cut off.After the driver is disconnected for
at least ten minutes, the dc bus voltage of the measuring driver is lower than 36V or the charging indicator
of the driver is off.
⚫
Be sure not to remove safety devices and do not touch live parts and devices.
⚫
Be sure to connect the PE wire correctly and ground the drive housing properly before the drive is
powered on.
2.3
Port definition instructions
2.3.1
External I / O port (X1) instructions
Figure 2-3 I/O interface X1 of FD2S driver
