Kilsen KFP-AF Series, Руководство по установке

Страница: 67 / 80

KFP-AF Series Installation Manual 63
Appendix A
Default configurations
The following table includes default configurations for your control panel.
Table 12: Default configurations
Description Default setting
Power supply operation 230 VAC
Control panel ID 01
Day/Night mode Full day to day mode
Control panel network
operation Standalone
Network Global commands Yes
Network mask 0 (all panels excluded from the mask)
Repeater panel network
operation Networked
repeater
Repeater mask All panels repeated
IP address 192.168.104.140
Subnet mask 255.255.255.0
Gateway 0.0.0.0
Port 2505
24V auxiliary
Not deactivated during reset, not deactivated when running on
batteries
Fault Mask All faults will be reported
Sounders re-sound Sounders re-sounds
Expansion boards repeater Network board is configured
Initial zone 1
All detectors, manual call points, and zone modules to the initial
zone
All sounders to the sounder output group
Autosetup zone
All relay/non-supervised outputs to the programmable group 1
(PRG1)