Kilsen KFP-AF Series, Руководство по установке

Страница: 51 / 80

Chapter 3: Configuration and commissioning
KFP-AF Series Installation Manual 47
Control panel I/O configuration
Input configuration
Configurable options for each input are shown in the table below.
Option Description
OpMode Select this option to assign the input operation mode
Control Select this option enable or disable an input
Input operation modes are shown in the table below. The default mode for all
inputs is T_AL. (technical alarm activation: unlatched condition indicated on the
LCD and stored in the event log)
Table 8: Input modes
Mode Description
T_AL (default) Technical alarm activation. An unlatched condition indicated on the LCD
and stored in the event log.
LG Logged activation. An unlatched condition that generates no indications
but it is only stored on the event log.
RST Activation resets the panel remotely. To reset again, the input must be
deactivated and then activated again.
FLT External fault. Activation generates a latched fault event indicated as
external fault.
UKSB British school class change. Activation will activate sounders for school
class change indication.
To configure a panel input:
1. Select Field setup from the main menu
2. Select Panel I/O configuration
3. Select Panel inputs and then select the corresponding panel input
4. Select the input operation mode
5. Press F4 (Enter) and then press F2 (Exit)
6. Press F1 (Keep), F3 (Apply), F4 (Discard), or F2 (Exit)
To enable or disable a panel input:
1. Select Field setup from the main menu
2. Select Panel I/O configuration
3. Select Panel inputs and then select the corresponding input
4. In the Control option, select ENB (enable) or DIS (disable)
5. Press F4 (Enter) and then press F2 (Exit)
6. Press F1 (Keep), F3 (Apply), F4 (Discard), or F2 (Exit)