Kilsen KFP-AF Series, Руководство по установке

Страница: 39 / 80

Chapter 3: Configuration and commissioning
KFP-AF Series Installation Manual 35
ID configuration
The default control panel ID is 01.
To change the control panel ID or description:
1. Select Panel setup from the main menu
2. Select ID configuration
3. Enter the control panel ID and description
4. Press F4 (Enter) and then press F2 (Exit)
5. Press F1 (Keep), F3 (Apply), F4 (Discard), or F2 (Exit)
Caution:
The panel ID must be in the range 01 to 32.
Date and time configuration
Select this option to set the control panel date and time or to synchronize the
date and time in a fire network.
To set the control panel date and time:
1. Select Panel setup from the main menu
2. Select Date and time
3. Enter the date using the format DD/MM/YY (for example, 10/06/09)
4. Enter the time using the format hh:mm:ss (for example, 15:03:25)
5. Press F4 (Enter) and then press F2 (Exit)
To synchronize the date and time in a fire network:
1. Select Panel setup from the main menu
2. Select Date and time and then select Firenet time sync
3. Select YES to synchronize the date and time
4. Press F2 (Exit) to exit the menu
Regional options
Select this option to set the regional operation mode. Available options are
shown in the table below.
Operating mode Region
EN 54-2 (default) European Union
EN 54-2 Evacuation European Union (Spain)
NBN S21-100 European Union (Belgium)