Kilsen KFP-AF Series, Руководство по установке

Страница: 42 / 80

Chapter 3: Configuration and commissioning
38 KFP-AF Series Installation Manual
5. Press F1 (Keep), F3 (Apply), F4 (Discard), or F2 (Exit)
Allow control
Select this option to allow the control panel to control the fire network (by sending
global commands). The default setting is YES (global commands are allowed).
To change the global control settings:
1. Select Panel setup from the main menu
2. Select Firenet and then select Allow control
3. Select the control panel ID from the list and then select YES (to allow global
control) or NO (to stop global control)
4. Press F4 (Enter) and then press F2 (Exit)
5. Press F1 (Keep), F3 (Apply), F4 (Discard), or F2 (Exit)
Functions that can be controlled globally are:
• Reset
• Panel
Silence
• Sounder start/stop
• Sounder delay (enable delay or cancel active delay)
• Fire routing delay (enable delay or cancel active delay)
• Enable or disable zones
Class B
Select this option to configure your fire network class configuration (Class A or
Class B). The default setting is NO (Class A network configuration).
To change the network class settings:
1. Select Panel setup from the main menu
2. Select Firenet and then select Class B
3. Select YES (for Class B network) or NO (for Class A network)
4. Press F4 (Enter) and then press F2 (Exit)
5. Press F1 (Keep), F3 (Apply), F4 (Discard), or F2 (Exit)