Kikusui PBZ20-20, Руководство пользователя

Страница: 39 / 170

PBZ
39
Circuit Configuration
2
Ba
sic Featu
res
Control (protection feature, measurement feature,
synchronization feature, etc.)
Power supply
Circuit Common and I/O Terminals
The PBZ circuit commons are divided into the following two categories:
• Output amplifier and OUTPUT terminal
• Chassis
Each circuit common and its related terminals are shown in the following table. When you
want to connect to an external device, see the appropriate page listed here.
Overview Related operations
This circuit controls all the PBZ
features. “Protection Features and Alarms” p. 66
“Measurement Feature and Current Monitor
Output” p. 62
“Synchronization Feature” p. 147
Overview Related operations
Supplies power to each circuit. The
input voltage range is 90 Vac to 250
Vac. The primary circuit is equipped
with a power factor correction circuit. “Connecting the Power Cord” p. 23
See
See
Circuit common Terminal name
Output amplifier and OUTPUT
terminal OUT and COM (front panel OUTPUT). p. 31
OUT and COM (rear panel OUTPUT). p. 27
EXT SIG IN. p. 57
I MON. p. 65
SENSING OUT and SENSING COM. p. 32
PARALLEL IN and PARALLEL OUT. p. 143
J1 terminal (use a photocoupler to isolate J1
STATUS’ common from the OUTPUT terminals). p. 134
Chassis Chassis terminal (rear panel OUTPUT chassis
terminal). p. 27
10 MHz IN (the common is isolated from the chassis,
and the maximum isolation voltage is 42 Vpeak). p. 152
10 MHz OUT. p. 152
TRIG IN.
p. 107
p. 148
TRIG OUT.
LAN, USB, GPIB, and RS232C. --
REMOTE. p. 14
See