Kikusui PBZ20-20, Руководство пользователя, Страница: 107 / 170

PBZ
107
Step Settings
4
Se
quences
●
OUTPUT (output on and off)
• ON: The output is turned on.
• OFF: The output is turned off.
●
TRIG OUT (trigger signal output)
• ON: A trigger signal is generated when step execution
time begins.
• OFF: Trigger signals are not generated.
p. 89 , p. 148
You can select the output trigger signal polarity (rising or falling). Use to select the
slope.
●
TRIG IN (trigger signal input)
Use TRIG IN to set the PBZ’s
response to trigger signal input.
• ON: The PBZ waits for a trigger
signal to be applied when step
execution time begins (the PBZ
enters the WAIT state).
• OFF: Trigger signals are not
detected.
The trigger signal input type is level
trigger. You can set the level polarity to either H (high) or L (low). Use to select the
level.
The time to switch the output from off to on or from on to off is added to the step execution
time.
Step n - 1 Step number Step n Step n + 1
OUTPUT setting
Output state
OUTPUT setting
Output state
ON
ON OFF OFF
OFF ON ON
Time required to switch the output state
40.1 ms
40 ms
Open
Open ON
TIME setting TIME setting TIME setting
TRIG OUT
Step n Step n + 1
(Polarity set to rising)
See
CONFIG
Step n - 1 Step n
Step n + 1
WAIT
TRIG IN
Trigger input
signal
OFF
ON
(Polarity set to H level)
CONFIG