1 x
SW Panel 1-1/4 x 42 x 87”
1 x
Front Wall Panel 1-1/4 x 42 x 87”
1 x
Back Wall Panel 1-1/4 x 42 x 87”
Wood Parts
050
Step 5: Swing Wall Assembly
A:
Place (051) Front Wall Panel against the left side of (050) SW Panel noticing panel orientation. The tops and
bottoms of the panels should be flush and panels square. Pre-drill with a 3/16” drill bit, then fasten (051) Front
Wall Panel to (050) SW Panel with 4 (WL5) 1/4 x 2-1/2” Wafer Lags. (fig. 5.1 and 5.2)
B:
Place (052) Back Wall Panel against the right side of (050) SW Panel noticing panel orientation. The tops
and bottoms of the panels should be flush and panels square. Pre-drill with a 3/16” drill bit, then fasten (050)
SW Panel to (052) Back Wall Panel to with 4 (WL5) 1/4 x 2-1/2” Wafer Lags. (fig. 5.1 and 5.3)
Fig. 5.2
052
Fig. 5.1
050
Flush
Hardware
8 x
1/4 x 2-1/2” Wafer Lag
WL5
Flush
051
052
Notice (051) Front Wall
Panel overlaps (050)
SW Panel
Fig. 5.3
WL5
WL5
050
050
Notice (050) SW Panel
overlaps (052) Back
Wall Panel
051
24
Содержание Cedar Summit RICHMOND LODGE
Страница 77: ...NOTES 77...