Step 14: Swing Beam Assembly
Hardware
A:
Attach 6 Swing Hangers to (140) Beam SW using 2 (G7) 5/16 x 5-1/2” Hex Bolts (with 2 flat washers and 1
lock nut) per swing hanger, as shown in fig. 14.1.
B:
Flush to the Fort Side end of (140) Beam SW attach 2 L-Beam Brackets with 2 (G21) 5/16 x 3-3/4” Hex
Bolts (with 2 flat washers and 1 lock nut). (fig. 14.2)
C:
Install 1 (WB7) 5/16 x 3” Wafer Bolt (with flat washer and t-nut) in the middle bolt hole in (140) Beam SW
as shown in fig. 14.1 and 14.3.
IT IS IMPORTANT THAT THIS BOLT IS ATTACHED. IT WILL MINIMIZE
CHECKING OF WOOD.
D:
Attach Cedar Summit Plaque to centre of (140) Beam SW (over top of t-nut) using 4 (S18) #6 x 1” Wood
Screws. (fig. 14.4)
12 x
5/16 x 5-1/2” Hex Bolt (5/16” flat washer x 2, 5/16” lock nut)
2 x
5/16 x 3-3/4” Hex Bolt (5/16” flat washer x 2, 5/16” lock nut)
1 x
5/16 x 3” Wafer Bolt (5/16” flat washer & 5/16” t-nut)
4 x
#6 x 1” Wood Screw
Other Parts
6 x Swing Hangers
2 x L-Beam Bracket
1 x Cedar Summit Plaque
G21
Wood Parts
1 x
Beam SW 4 x 6 x 88”
140
Fig. 14.3
140
5/16” Flat
Washer
Fig. 14.1
Fig. 14.2
Fig. 14.4
G21
5/16” Flat
Washer
5/16”
Lock Nut
Swing Hanger x 6
5/16” Flat
Washer
5/16”
T-Nut
Swing Side
Fort Side
L-Beam
Bracket
S18
x 4
G7
G7
5/16”
Lock Nut
Flush
5/16” Flat
Washer
L-Beam
Bracket
Fort Side
WB7
WB7
Cedar Summit
Plaque
S18
140
140
43
Содержание Cedar Summit RICHMOND LODGE
Страница 77: ...NOTES 77...