Step 20: Attach Flange Assembly to Fort
Part 1
Hardware
14 x
#12 x 1” Pan Screw
4 x
#12 x 2” Pan Screw
8 x
#12 Screw Bezel
S7
(5 per side)
S6
A:
With a helper place the Flange Assembly flush to the top opening in (040) SL Panel as shown in fig. 20.1,
then pre-drill 1/8” pilot holes in the bottom 4 mounting locations (approximate spots where circles are on
figure), making sure the pre-drilled holes are a minimum of 2.5 cm (1”) deep. (fig. 20.2)
B:
Attach Flange Assembly to bottom of (040) SL Panel opening using 4 (S7) #12 x 2” Pan Screws (with #12
Screw Bezel) in the pre-drilled holes. (fig. 20.2) Make sure the flat surfaces of the Flange Assembly are flush
to the (040) SL Panel as shown in fig. 20.3.
C:
Attach the Flange Assembly flush to top of (040) SL Panel opening using 4 (S6) #12 x 1” Pan Screws (with
#12 Screw Bezel) as shown in fig. 20.2 and to both sides using 5 (S6) #12 x 1” Pan Screw per side. (fig. 20.2)
Flange
Assembly
w/ #12 Screw
Bezel
Bottom
Side
Top
Bottom of
slide flush
with bottom
of opening
Top of (040) SL
Panel opening
Fig. 20.2
Fig. 20.1
Fig. 20.3
Outside View
Inside View
040
Top
Side
Bottom
Side
S6
S6
Side
040
w/ #12 Screw
Bezel
S7
Flange
Assembly
50
Содержание Cedar Summit RICHMOND LODGE
Страница 77: ...NOTES 77...