2 x
Heavy SW Post 2 x 3 x 86-11/16”
1 x
SW Upright 4 x 4 x 50-15/16”
1 x
SW Support 5/4 x 4 x 46-1/2”
Step 15: Swing End Assembly
152
151
150
A:
Loosely attach 2 (150) Heavy SW Posts to (151) SW Upright using 2 (G7) 5/16 x 5-1/2” Hex Bolts (with lock
washer, flat washer and t-nut). Notice 2 bolt holes at top of (151) SW Upright and orientation of angle. (fig.
15.1)
B:
Attach (152) SW Support to both (150) Heavy SW Posts and (151) SW Upright using 3 (G4) 5/16 x 4” Hex
Bolts (with lock washer, flat washer and t-nut). Tighten all bolts. (fig. 15.1)
C:
Install 2 (WB7) 5/16 x 3” Wafer Bolts (with flat washer and t-nut) in the top bolt holes in (151) SW Upright
as shown in fig. 15.1.
IT IS IMPORTANT THAT THESE BOLTS ARE ATTACHED. THEY WILL MINIMIZE
CHECKING OF WOOD.
Hardware
Wood Parts
5/16”
T-Nut
5/16” Flat
Washer
Fig. 15.1
151
152
2 x
5/16 x 5-1/2” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
3 x
5/16 x 4” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
2 x
5/16 x 3” Wafer Bolt (5/16” flat washer & 5/16” t-nut)
G7
WB7
G4
Notice 2 bolt
holes at top and
orientation of
the angle
150
5/16” Lock
Washer
G7
WB7
5/16”
T-Nut
5/16”
T-Nut
5/16” Flat
Washer
5/16” Flat
Washer
5/16” Lock
Washer
G4
44
Содержание Cedar Summit RICHMOND LODGE
Страница 77: ...NOTES 77...