Step 25: Attach TNR Brace Assembly
Hardware
1 x
1/4 x 1-1/4” Pan Bolt
1 - (1/4” flat washer, 1/4” lock nut - previously removed)
2 x
#12 x 1” Pan Screw
1 x
#8 x 3” Wood Screw
2 x
#8 x 2” Wood Screw
PB2
Other Parts
1 x TNR3 Post Mount
A:
Use (231) TNR Upright as a guide to judge the proper bolt location, remove the bottom pan bolt and nut.
The
bolt will no longer be needed, but keep the lock nut.
(fig. 25.1 and 25.2)
B:
Attach the top of the TNR3 Post Mount to TNR2 Slide Clamp Ring using 1 (PB2) 1/4 x 1-1/4” Pan Bolt (with
the previously removed lock nut and 1 flat washer). (fig. 25.2)
C:
Insert TNR3 Post Mount on (231) TNR Upright, pre-drill with a 1/8” drill bit then attach with 2 (S6) #12 x 1”
Pan Screws
.
(fig. 25.2)
D:
Attach (230) TNR Ground Brace flush to the bottom of (041) Back Narrow Panel with 2 (S11) #8 x 2” Wood
Screws and 1 (S4) #8 x 3” Wood Screw. (fig. 25.1 and 25.3)
TNR3 Post
Mount
Remove PB1 (1/4 x 3/4”
Pan Bolt) first then install
PB2 (1/4 x 1-1/4” Pan Bolt
with previously removed
lock nut)
Fig. 25.1
Fig. 25.2
PB2
1/4” Flat
Washer
231
231
Lock
Nut
S6
TNR2 Slide
Clamp Ring
Fig. 25.3
S4
230
S11
S11
S4
S6
041
041
TNR Brace
Assembly
58
Содержание Cedar Summit RICHMOND LODGE
Страница 77: ...NOTES 77...