Keysight WLAN Measurement Guide 71
Making WLAN Measurements
Making WLAN List Sequence (WLS) Measurements
Step 6.
Get the results:
Viewing WLS Measurement Results
To view the measurement results, press
View/Display
,
Result Metrics
. This
view provides a list of measurement results with Pass or Fail indicator
highlighted in green or in red, respectively. You can use the DOWN/UP key to
scroll the list by using either the front panel or the key board.
Figure 2-30
WLS (Result Metrics View)
Pressing
View/Display
,
Parameter List
, you can see the available SCPI
commands listed alphabetically for this measurement. You can verify and
change values with DOWN/UP key from either the front panel or key board.
Table 2-6
SCPI Commands for WLS Measurement (5)
SCPI Commands
Notes
READ:WLS1?
After this command is sent to the analyzer, all
results are returned.
For more information on results returned, see
N9077A & W9077A WLAN Measurement
Application User’s and Programmer’s Reference
.
DISP:WLS:VIEW RES
All measurement results are displayed in the
Result Metrics View with Pass/Fail indicator.