Keysight WLAN Measurement Guide 23
Making WLAN Measurements
Making Channel Power Measurements
Example of One-Button-Measurement - Channel Power
This example assumes the signal is correctly applied to the input.
Step 1.
Press
Mode Preset
Step 2.
Press
Meas, Channel Power
Step 3.
View the measurement default view. (See
).
Figure 2-3
Channel Power (Default View)
If you have a problem, and get an error message, see
Instrument Messages
.
Example of Using SCPI Commands
Select WLAN mode
INST WLAN
Select the Channel Power measurement
CONF:CHP
Get the measurement result Channel Power (dBm).
READ:CHP:CHP?