48 Keysight WLAN Measurement Guide
Making WLAN Measurements
Making Power vs Time Measurements
Measurement Example Signal Settings
Frequency:
2412 MHz
Output Power: -30 dBm (at analyzer input)
WLAN signal radio standard: 802.11n/40 MHz
Data Rate:
270 Mbps 64 QAM
Measurement Procedure
Step
Action
Notes
1.
Select WLAN Mode.
a. Press
MODE
,
WLAN
.
2.
Preset the analyzer.
a.
Press
Mode Preset
button for the
factory preset.
b.
To recall a user-defined Preset:
Press
User Preset
,
User Preset
to
preset the current mode.
3.
Select the desired radio
standard.
a. Press
MODE Setup
,
Radio Std
,
802.11n
,
802.11n (40 MHz)
.
4.
If necessary, select the
frequency settings.
a. Press
FREQ Channel
,
2412
,
MHz
.
5.
Select the measurement.
a. Press
MEAS
,
Power vs Time
.
6.
Examine the keys that are
available to change
measurement parameters from
their default conditions.
a. Press
Meas Setup,
then select the
parameters you want to change and
input your settings.
Make sure
Burst Time
is
set as accurate as possible
and
Ramp Time Length
is no shorter than the actual
ramp time, otherwise the
ramp may be lost.
7.
Select the power vs time
measurement again or restart
the measurement.
a. Press
Meas, Power vs Time
, or
press
Restart
.